EDS-516A-MM-SC

EDS-516A-MM-SC is a managed Layer 2 industrial Ethernet switch in the EDS-516A Series. Managed Ethernet switch with 14 10/100BaseT(X) ports,2 100BaseFX multi-mode ports with SC connectors, 0 to 60°C operating temperature

Specifications:

• 10/100BaseT(X) Ports (RJ45 connector): 14 Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection
• 100BaseFX Ports (multi-mode SC connector): 2
• Ambient Relative Humidity: 5 to 95% (non-condensing)
• Connector: 2 removable 6-contact terminal block(s)
• Console Port: RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1)
• Details: See www.moxa.com/warranty
• Digital Inputs: +13 to +30 V for state 1 -30 to +3 V for state 0 Max. input current: 8 mA
• Dimensions: 94 x 135 x 142.7 mm (3.7 x 5.31 x 5.62 in)
• Ethernet Interface: Turbo Ring, Master, Coupler, Reserve
• Filter: 802.1Q VLAN GMRP GVRP IGMP v1/v2 Port-based VLAN
• Hazardous Locations: ATEX Class I Division 2
• LED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 100M (fiber port), MSTR/HEAD, CPLR/TAIL
• Max. No. of VLANs: 64
• Optical Fiber: | 100BaseFX Multi-Mode | Single-Mode (40 km) | Single-Mode (80 km) Fiber Cable Type | OM1 | 50/125 µm | G.652 | G.652 800 MHz x km Typical Distance | 4 km | 5 km | 40 km | 80 km Wavelength | Typical (nm) | 1300 | 1310 | 1550 TX Range (nm) | 1260 to 1360 | 1280 to 1340 | 1530 to 1570 RX Range (nm) | 1100 to 1600 | 1100 to 1600 | 1100 to 1600 Optical Power | TX Range (dBm) | -10 to -20 | 0 to -5 | 0 to -5 RX Range (dBm) | -3 to -32 | -3 to -34 | -3 to -34 Link Budget (dB) | 12 | 29 | 29 Dispersion Penalty (dB) | 3 | 1 | 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power.Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).
• VLAN ID Range: VID 1 to 4094
• Packet Buffer Size: 2 Mbits
• Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
• IGMP Groups: 256
• Industrial Protocols: EtherNet/IP Modbus TCP
• MIB: MIB-II Bridge MIB Ethernet-like MIB P-BRIDGE MIB Q-BRIDGE MIB RMON MIB Groups 1, 2, 3, 9 RSTP MIB
• Redundancy Protocols: STP MSTP RSTP LACP Link Aggregation Turbo Chain Turbo Ring v1/v2
• Security: HTTPS/SSL RADIUS TACACS+ Port Lock SSH Broadcast storm protection
• Input Current: 0.44 A @ 24 VDC
• Input Voltage: 24 VDC Redundant dual inputs
• Operating Voltage: 12 to 45 VDC
• Overload Current Protection: Supported
• Reverse Polarity Protection: Supported
• EMC: EN 55032/35
• EMI: CISPR 32, FCC Part 15B Class A
• EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
• Operating Temperature: 0 to 60°C (32 to 140°F)
• Shock: IEC 60068-2-27
• Vibration: IEC 60068-2-6
• Housing: Metal
• Installation: DIN-rail mounting Wall mounting (with optional kit)
• MAC Table Size: 8 K
• Weight: 1586 g (3.50 lb)
• Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.1X for authentication IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.3x for flow control IEEE 802.3ad for Port Trunk with LACP
• Management: IPv4/IPv6 SNMPv1/v2c/v3 LLDP Port Mirroring Back Pressure Flow Control BOOTP DDM DHCP Option 66/67/82 DHCP Server/Client Flow control RARP RMON SMTP SNMP Inform Syslog Telnet TFTP
• Time Management: NTP Server/Client SNTP
• Alarm Contact Channels: Resistive load: 1 A @ 24 VDC
• Freefall: IEC 60068-2-31
• IP Rating: IP30
• Maritime: DNV
• Priority Queues: 4
• Safety: EN 62368-1 UL 60950-1 UL 508
• Time: 247,676 hrs
• Warranty Period: 5 years