Description
Industrial Managed Ethernet switch – Compact managed Ethernet switch system with 3 10/100/1000BaseT(X) or 100/1000BaseSFP slot combo ports, 2 slots for 4-port fast Ethernet interface modules, for a total of up to 11 ports, 0 to 60°C operating temperature
Input/Output Interface
- Digital Inputs: +13 to +30 V for state 1 -30 to +3 V for state 0 Max. input current: 8 mA
- Alarm Contact Channels: Relay output with current carrying capacity of 1 A @ 24 VDC
Ethernet Interface
- Module: 2 slots for any combination of 4-port interface modules, 10/100BaseT(X) or 100BaseFX
- Standards: IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1p for Class of Service IEEE 802.1Q for VLAN Tagging IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1X for authentication IEEE 802.3 for 10BaseT IEEE 802.3ab for 1000BaseT(X) IEEE 802.3ad for Port Trunk with LACP IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for flow control
Ethernet Software Features
- Filter: GMRP GVRP IGMP v1/v2 Port-based VLAN
- Industrial Protocols: EtherNet/IP Modbus TCP
- Management: Back Pressure Flow Control BOOTP DDM DHCP Option 66/67/82 DHCP Server/Client Flow control IPv4/IPv6 LLDP Port Mirror RARP RMON SMTP SNMP Inform SNMPv1/v2c/v3 Syslog Telnet TFTP
- MIB: Bridge MIB Ethernet-like MIB MIB-II P-BRIDGE MIB Q-BRIDGE MIB RMON MIB Groups 1, 2, 3, 9 RSTP MIB
- Redundancy Protocols: Link Aggregation MSTP RSTP STP Turbo Chain Turbo Ring v1/v2
- Security: Broadcast storm protection HTTPS/SSL Port Lock RADIUS SSH TACACS+
- Time Management: NTP Server/Client SNTP
Switch Properties
- IGMP Groups: 256
- MAC Table Size: 8 K
- Max. No. of VLANs: 64
- Packet Buffer Size: 1 Mbits
- Priority Queues: 4
- VLAN ID Range: VID 1 to 4094
LED Interface
- LED Indicators: PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL, G1/G2/G3
Serial Interface
- Console Port: RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1)
DIP Switch Configuration
- Ethernet Interface: Turbo Ring, Master, Coupler, Reserve
Power Parameters
- Connection: 1 removable 6-contact terminal block(s)
- Input Voltage: 12/24/48 VDC Redundant dual inputs
- Input Current: 1.8 A @ 12 VDC Note: These are the input current ratings for the device with the maximum number of modules installed.
- Power Consumption (Max.): 21.6 W @ 12 VDC Note: These are the power consumption ratings for the device with the maximum number of modules installed.
- Overload Current Protection: Supported
- Reverse Polarity Protection: Supported
Physical Characteristics
- IP Rating: IP30
- Dimensions: 125 x 151 x 157.4 mm (4.92 x 5.95 x 6.20 in)
- Weight: 2,016 g (4.44 lb)
- Installation: DIN-rail mounting Wall mounting (with optional kit)
Environmental Limits
- Operating Temperature: 0 to 60°C (32 to 140°F)
- Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
- Freefall: IEC 60068-2-32
- EMC: EN 55032/35 EN 61000-6-2/-6-4
- EMI: CISPR 32, FCC Part 15B Class A
- EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
- Hazardous Locations: ATEX Class I Division 2
- Maritime: ABS DNV LR NK
- Railway: EN 50121-4
- Safety: UL 508
- Shock: IEC 60068-2-27
- Traffic Control: NEMA TS2
- Vibration: IEC 60068-2-6
MTBF
- Time: 483,344 hrs
- Standards: Telcordia (Bellcore), GB
Warranty
