MGate 5118-T

Serial communication device – 1-port J1939 to Modbus/PROFINET/EtherNet/IP gateway, -40 to 75°C operating temperature

Ethernet Interface

• 10/100BaseT(X) Ports (RJ45 connector): 2 Auto MDI/MDI-X connection
• Magnetic Isolation Protection: 1.5 kV (built-in)

Ethernet Software Features

• Industrial Protocols: Modbus TCP Client (Master), Modbus TCP Server (Slave), PROFINET IO Device, EtherNet/IP Scanner, EtherNet/IP Adapter
• Configuration Options: Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console
• Management: ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client
• MIB: RFC1213, RFC1317
• Time Management: NTP Client

Security Functions

• Authentication: Local database
• Encryption: HTTPS, AES-128, AES-256, SHA-256
• Security Protocols: SNMPv3 SNMPv2c Trap HTTPS (TLS 1.3)

Serial Interface

• Console Port: RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
• No. of Ports: 1
• Connector: DB9 male
• Serial Standards: RS-232/422/485
• Baudrate: 50 bps to 921.6 kbps
• Data Bits: 7, 8
• Parity: None, Even, Odd, Space, Mark
• Stop Bits: 1, 2
• Flow Control: RTS Toggle (RS-232 only), RTS/CTS
• Pull High/Low Resistor for RS-485: 1 kilo-ohm, 150 kilo-ohms
• Terminator for RS-485: 120 ohms
• Isolation: 2 kV

Serial Signals

• RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• RS-422: Tx+, Tx-, Rx+, Rx-, GND
• RS-485-2w: Data+, Data-, GND
• RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND

Serial Software Features

• Configuration Options: Serial Console
• Industrial Protocols: J1939, Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave

Modbus RTU/ASCII

• Mode: Master, Slave
• Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16, 23
• Max. No. of Commands: 128

Modbus TCP

• Mode: Client (Master), Server (Slave)
• Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16, 23
• Max. No. of Client Connections: 16
• Max. No. of Server Connections: 32
• Max. No. of Commands: 128

PROFINET

• Mode: IO Device
• Max. No. of IO Controller Connections: 1 (for read/write)
• Input Data Size: 512 bytes
• Output Data Size: 512 bytes

EtherNet/IP

• Mode: Scanner, Adapter
• CIP Objects Supported: Identity, Message Router, Assembly, Connection Manager, TCP/IP interface, Ethernet link, Port
• Max. No. of Scanner Connections: 1 (for read-only), 1 (for read/write)
• Max. No. of Adapter Connections: 4
• Input Data Size: 496 bytes
• Output Data Size: 496 bytes

CAN Interface

• Industrial Protocols: J1939
• No. of Ports: 1
• Connector: Spring-type Euroblock terminal
• Baudrate: 250 Kbps, 500 Kbps, 1 Mbps
• Terminator: 120 ohms