Description
NPort S8455I-T is a industrial serial device server in the NPort S8000 Series. 4 RS-232/422/485 ports, 5 10/100BaseT(X) ports, 12 to 48 VDC, 2 kV isolation protection, -40 to 75°C operating temperature
Specifications:
- 10/100BaseT(X) Ports (RJ45 connector): 5
- Ambient Relative Humidity: 5 to 95% (non-condensing)
- Arm®-based Platform Support: Windows 11Linux Kernel 6.x, 5.x and 4.xmacOS 14, 13, 12 and 11
- Connector: DB9 male
- Console Port: RS-232 (TxD, RxD, GND), 8-pin RJ45 (19200, n, 8, 1)
- Details: See www.moxa.com/warranty
- Digital Input Channels: 2
- Digital Inputs: +13 to +30 V for state 1 -30 to +1 V for state 0 Max. input current: 8 mA
- Dimensions: 73.1 x 134 x 125 mm (2.88 x 5.27 x 4.92 in)
- Ethernet Interface: Coupler Master Reserved Turbo Ring
- Filter: 802.1Q GVRP IGMP v1/v2
- Hazardous Locations: Class I Division 2
- Max. No. of VLANs: 64
- No. of Ports: 4
- Optical Fiber: | 100BaseFX Multi-Mode | Single-Mode Fiber Cable Type | OM1 | 50/125 µm | G.652 800 MHz x km Typical Distance | 4 km | 5 km | 40 km Wavelength | Typical (nm) | 1300 | 1310 TX Range (nm) | 1260 to 1360 | 1280 to 1340 RX Range (nm) | 1100 to 1600 | 1100 to 1600 Optical Power | TX Range (dBm) | -10 to -20 | 0 to -5 RX Range (dBm) | -3 to -32 | -3 to -34 Link Budget (dB) | 12 | 29 Dispersion Penalty (dB) | 3 | 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power.Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).
- Power Connector: 2 removable 6-contact terminal block(s)
- Pull High/Low Resistor for RS-485: 1 kilo-ohm, 150 kilo-ohms
- RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422: Tx+, Tx-, Rx+, Rx-, GND
- RS-485 Data Direction Control: Automatic Data Direction Control (ADDC)
- RS-485-2w: Data+, Data-, GND
- RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
- Serial Standards: RS-232/422/485
- Terminator for RS-485: 120 ohms
- VLAN ID Range: VID 1 to 4094
- Windows Real COM Drivers: Windows 11, 10, 8.1, 8, 7, Vista, XP, ME, 98 and 95Windows Server 2022, 2019, 2016, 2012 R2, 2012, 2008 R2, 2008, 2003, 2000 and NTWindows Embedded CE 5.0 and 6.0, Windows XP Embedded
- Baudrate: 50 bps to 921.6 kbps
- Environmental Testing: IEC 60068-2-1 IEC 60068-2-3
- Storage Temperature: -40 to 75°C (-40 to 167°F)
- Virtual Machine: VMWare ESXi (Windows 11 / 10)VMware Fusion (Windows on macOS 14, 13, 12, 11 and 10.1x)Parallels Desktop (Windows on macOS 14, 13, 12, 11 and 10.1x)
- IGMP Groups: 256
- MIB: Bridge MIB Device Settings MIB Ethernet-like MIB MIB-II P-BRIDGE MIB Q-BRIDGE MIB RFC1213, RFC1317 RMON MIB Groups 1, 2, 3, 9 RSTP MIB
- Redundancy Protocols: RSTP Turbo Chain Turbo Ring v1 Turbo Ring v2
- Security: HTTPS, SSL SSH
- Input Current: 935 mA @ 12 VDC
- Input Voltage: 12 to 48 VDC
- Isolation: 2 kV
- Magnetic Isolation Protection: 1.5 kV (built-in)
- No. of Power Inputs: 2
- EMC: EN 55032/24
- EMI: CISPR 32, FCC Part 15B Class A
- EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 1 kV; Signal: 0.25 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m IEC 61000-4-8 PFMF
- Operating Temperature: -40 to 75°C (-40 to 167°F)
- Shock: IEC 60068-2-27
- Vibration: IEC 60068-2-6
- Housing: Metal
- Installation: DIN-rail mounting Wall mounting (with optional kit)
- Weight: 578 g (1.27 lb)
- Standards: IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1p for Class of Service IEEE 802.1Q for VLAN Tagging IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1X for authentication IEEE 802.3 for 10BaseT IEEE 802.3ad for Port Trunk with LACP IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for flow control
- Android API: Android 3.1.x and later
- Fixed TTY Drivers: macOS versions: 14, 13, 12, 11 and 10.1x SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
- Linux Real TTY Drivers: Kernel versions: 6.x, 5.x, 4.x, 3.x, 2.6.x and 2.4.x
- Management: BOOTP Device Search Utility (DSU) DHCP Client DHCP Option 82 HTTP IPv4 LLDP Port Mirror RMON SMTP SNMPv1/v2c/v3 Syslog TCP/IP Telnet Web Console
- Time Management: SNTP
- Alarm Contact Channels: 2 Resistive load: 1 A @ 24 VDC
- Authentication: Local Account Accessibility RADIUS
- Configuration Options: Web Console (HTTP/HTTPS) Windows Utility Serial Console Telnet Console
- Data Bits: 5, 6, 7, 8
- Flow Control: None RTS/CTS XON/XOFF
- Operation Modes: Disabled Real COM mode RFC2217 mode TCP Client mode TCP Server mode UDP mode
- Parity: None, Even, Odd, Space, Mark
- Priority Queues: 4
- Safety: EN 60950-1 IEC 60950-1 UL 508 UL 60950-1
- Stop Bits: 1, 1.5, 2
- Time: 287,354 hrs
- Warranty Period: 5 years
