Description
Industrial Unmanaged Ethernet switch – Unmanaged Ethernet switch with 4 10/100BaseT(X) ports, 1 100BaseFX single-mode port with SC connector for 80 km transmission, relay output warning, 0 to 60°C operating temperature
Input/Output Interface
- Alarm Contact Channels: 1 relay output with current carrying capacity of 1 A @ 24 VDC
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector): 4 Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection
- 100BaseFX Ports (single-mode SC connector, 80 km): 1
- Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for flow control
- Optical Fiber: Read more 100BaseFX Multi-Mode Fiber Cable Type OM1 OM2 OM3 OM4 Typical Distance 4 km 4 km 4 km 4 km Wavelength TX Range (nm) 1260 to 1360 RX Range (nm) 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 RX Range (dBm) -3 to -32 Link Budget (dB) 12 Dispersion Penalty (dB) 3 3 3 3 100BaseFX Multi-Mode Single-Mode Single-Mode (40 km) (80 km) Fiber Cable Type 50/125 µm G.652 G.652 800 MHz x km Typical Distance 5 km 40 km 80 km Wavelength TX Range (nm) 1260 to 1360 1280 to 1340 1530 to 1570 RX Range (nm) 1100 to 1600 1100 to 1600 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 0 to -5 0 to -5 RX Range (dBm) -3 to -32 -3 to -34 -3 to -34 Link Budget (dB) 12 29 29 Dispersion Penalty (dB) 3 1 1 Note: When using a single-mode fiber transceiver over short distances, we highly recommend installing an attenuator to prevent damaging the transceiver due to excessive optical power.Note: To reach the "typical distance" of a fiber transceiver, the Link Budget (dB) should be greater than the combined Dispersion Penalty (dB) and Total Link Loss (dB).
DIP Switch Configuration
- Ethernet Interface: Port break alarm
Switch Properties
- MAC Table Size: 2 K
- Packet Buffer Size: 768 kbits
- Processing Type: Store and Forward
Power Parameters
- Connection: 1 removable 6-contact terminal block(s)
- Input Current: 0.2 A (max.)
- Input Voltage: 12-48 VDC Redundant dual inputs
- Operating Voltage: 9.6 to 60 VDC
- Reverse Polarity Protection: Supported
- Overload Current Protection: Supported
Physical Characteristics
- Housing: Metal
- IP Rating: IP30
- Dimensions: 53 x 135 x 105 mm (2.09 x 5.32 x 4.13 in)
- Weight: 790 g (1.75 lb)
- Installation: DIN-rail mounting Wall mounting (with optional kit)
Environmental Limits
- Operating Temperature: -10 to 60°C (14 to 140°F)
- Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
- Safety: UL 61010-201-1 UL 62368-1 EN 62368-1 IEC 62368-1
- EMC: EN 55032/35
- EMI: CISPR 32, FCC Part 15B Class A
- EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 MHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 3 V IEC 61000-4-8 PFMF
- Hazardous Locations: ATEX Class I Division 2 IECEx
- Vibration: IEC 60068-2-6
- Shock: IEC 60068-2-27
- Freefall: IEC 60068-2-32
- Maritime: DNV
MTBF
- Time: 3,327,332 hrs
- Standards: Telcordia (Bellcore), GB
Warranty
